What Is a P10 LED Display? Outdoor Uses and Viewing Distance
A P10 LED display has 10 mm between the centres of neighbouring pixels. That gives you 100 pixels per metre along each edge, or 10,000 pixels per square metre. Outdoors, P10 can work well for a roadside headline, a stadium score or a short public announcement. What matters is whether the smallest detail people need to read fits the screen at their viewing position.
How much detail fits on a P10 screen?
At an exact 10 mm pitch, multiply the active width and height in metres by 100 to get the native resolution. A 5.76 m wide by 2.88 m high display has 576 × 288 pixels. Use the dimensions of the lit face in this calculation. A frame or trim can add width to the sign without adding any pixels.
A module is the replaceable piece that carries the LEDs. For example, a 320 × 160 mm module at exact P10 contains 32 × 16 pixels. Several modules can form a cabinet, and several cabinets make the sign. When comparing two offers, check whether a quoted resolution describes one module, one cabinet or the whole display. Give the artwork designer the resolution of the assembled sign.
Those 288 vertical pixels are the space a designer has for the whole message. A 300 mm tall letter occupies about 30 pixel rows on P10. A 100 mm letter gets only ten. At that size, a narrow stroke or the gap inside an “8” can disappear when the artwork is scaled. Place a sample headline and its smallest line on the native canvas before choosing the type size.
What does a P10 screen cost?
DOIT VISION’s June 2024 P10 guide listed US$600–1,000 per square metre. A 10 m² face would have cost US$6,000–10,000 at that rate. For a larger layout, a 5.76 × 2.88 m face (16.5888 m²) would have carried a screen allowance of roughly US$10,000–16,600. For another size, multiply its active width by its active height in metres, then multiply the area by the unit rate.
The 2024 guide gave a general P10 range without a cabinet model or delivery terms. Use it as an early screen allowance. For a current project, request an equipment price for the chosen brightness and access arrangement, then add any separately quoted controller, packing, freight, support and installation.
Where does P10 work outdoors?
billboardy pri ceste
A driver may see only part of an advert before passing the sign. Start with the words that must be remembered, such as the destination or exit number. Lay them out at the final resolution alongside the actual logo. Review the frame from the approach angle, allowing only the time a passing viewer would have. If the name reads but the address disappears, give the address a separate frame or remove it from that placement.
Stadium scoreboards
Build a test frame with the longest team name, a two-digit score and the match clock. Use the farthest spectator seat to judge the digits, then check that the team names are still distinguishable beside them. A P10 board that carries the score clearly may have little room left for a full lineup. If the venue needs both, try separate score and lineup layouts before specifying a larger board or finer pitch.
Public information and wayfinding signs
A forecourt sign showing “Gate 4” and a large arrow gives each element plenty of space. A departures board showing destinations, times and platform changes divides the same pixels among many rows. Try the longest destination and a service-change message in the space available. Check from the queue entrance as well as beside the sign. For close readers who need several rows at once, compare a finer pitch at the same physical size.
What viewing distance works for P10?
Record the nearest normal viewing point, the farthest point where the message must still be read, and whether people stand still or move past. At the near point, a viewer may notice the individual pixels. At the far point, the limiting detail may be the clock, a direction arrow or one line of text. The two positions answer different questions.
Export a representative frame at the proposed native resolution. Check it at one image pixel per display pixel for broken strokes and lost detail. For a site trial, show the critical lettering at its intended physical height on a sample panel and read it from the recorded positions. A close-up on a laptop can reveal scaling problems; a full-size trial also tests the angle, ambient light and time available to read.
If a line fails, enlarge it on the canvas first. If doing so pushes essential content off the screen, a wider or taller face adds space. Where the opening is fixed, a finer pixel pitch adds pixels within that opening.
P10 vs P10.41 outdoor cabinets
Once the content layout works, match it to a cabinet grid. Standard Štvorec 960 P10 a Štvorec 1000 P10.41 both have 96 × 96 pixels per cabinet. The physical size of each cabinet differs.
| Štandardná konfigurácia | Štvorec 960 P10 | Štvorec 1000 P10.41 |
|---|---|---|
| Veľkosť Cabinet | 960 960 mm × | 1,000 1,000 mm × |
| Native pixels per cabinet | 96 × 96 | 96 × 96 |
| Module size and native pixels | 480 × 320 mm · 48 × 32 px | 500 × 250 mm · 48 × 24 px |
| Six columns × three rows | 5.76 × 2.88 m | 6.00 × 3.00 m |
| Native pixels in that layout | 576 × 288 | 576 × 288 |
The same artwork fits both 18-cabinet layouts. The one-metre cabinets make each letter physically larger and need a wider opening. If the tender sets a maximum 10 mm pitch, specify the exact P10 model. If a replacement must fill a six-metre active width using six whole cabinets, show the P10.41 option on the drawing and obtain approval for its pitch.
Brightness and service access
Both reference configurations list 6,500 nits. Standard Square 960 P10 also has a 10,000-nit option. For a sun-facing installation, check the face orientation and request power figures for the brightness configuration being quoted. For an evening scoreboard, include a night-time brightness check from the stands.
Both reference cabinets support front and rear service. On a wall with restricted rear access, trace how the installer will reach the module, power supply, receiving card and cables after the frame is closed. Include the active dimensions, native canvas and access route on the approval drawing.
- Téma
- What Is a P10 LED Display? Outdoor Uses and Viewing Distance
- Výber
- A P10 LED display has 10 mm between the centres of neighbouring pixels. That gives you 100 pixels per metre along each edge, or 10,000 pixels per square metre. Outdoors, P10 can work well for a roadside headline, a stadium score or a short public announcement. What matters is whether the smallest detail people need to read fits the screen at their viewing position.
- konfigurácia
- Štvorec 960, štvorec 1000
Čo znamená P10 na LED displeji?
How far away should people stand from a P10 screen?
Can a P10 outdoor screen show video?
Is P10 suitable for a stadium scoreboard?
How does P10 compare with P8 at the same screen size?
When should I specify P10 instead of P10.41?
Prediskutujte svoje požiadavky na jas
Povedzte nám, čo má obrazovka robiť. Môžeme vám navrhnúť štvorcovú konfiguráciu a potvrdiť podrobnosti o jase a výkone pre vašu cenovú ponuku.
Žiadosť o cenovú ponuku